LD体育·(中国)官方网站入口

Three Phase Oil-immersed Distribution Transformer

35kV leve and below oil-immersed distribution transformer

Product introduction

Oil-immersed distribution transformer, its HV level is 35kV and below, LV is 400V, its capacity is 2500kVA and below. Generally installed on the pole or in the distribution room, for lighting or power supply, three-phase power supply, fully sealed tank structure, to ensure the transformer safe and reliable operation.

Product features

Low Loss

1) adopt magnetic flux leakage calculation and take effective measures to reduce the stray loss. 2) select winding conductor according to the quantity. Reduce winding eddy current loss and stray loss. 3) high quality silicon steel sheet is adopted to effectively reduce no-load loss.
Low Noise

1) select high-quality core materials, select appropriate magnetic flux density and natural vibration frequency of the core. 2) the iron core automatic production line of GEORG company in Germany adopts stepped joint technology to improve magnetic separation at joints. 3) the high-precision jogger line with stepping shearing and automatic stacking function is adopted to reduce the burr of silicon steel sheet.
Low Temperature Rise

1) calculate the oil flow distribution, adopt a reasonable oil flow distribution structure, and reduce the winding hot spot temperature rise and average temperature rise. 2) the slotted structure of pressing plate is adopted to ensure the smooth oil road and reduce the temperature rise.
High Resistance to Short Circuit

1) the short circuit mechanical force is calculated by dynamic analysis method. 2) the high-voltage winding wire is automatically wound by flattening process to increase the wire hardness and strengthen the mechanical strength of the winding.
Fully Sealed Structure Without Lifting Core

1) the oil tank adopts fully sealed oil tank to isolate the transformer oil from the air and slow down the insulation aging of the transformer oil. 2) the sealing parts are made of acrylate to enhance the sealing reliability of the transformer.